3DAcceleratedWithATIHowto

All IN WONDER 9700 PRO     系列  ( AGP 8X )
RADEON 9700 PRO  系列            ( AGP 8X )
RADEON 9500 PRO  系列
8700/8800        系列
ALL IN WONDER RADEON 8500  系列

rpm -i --force fglrx-glc22-4.2.0-2.4.3.i586.rpm

dpkg -i --force-overwrite fglrx-glc22-4.2.0-2.4.3.i586.deb 

執行指令 make distclean
執行指令 make dep

執行指令 ./make.sh

執行指令 ./make_install.sh

執行指令 fglrxconfig

========================================================== 
Mouse and keyboard
==========================================================
1. serial port mice
2. PS/2 port mice
3. Bus mice
你可以選取相應的項目, 在此例中我們選取 2
接下來選取類型. 然後是設備名稱, 默認為 /dev/mouse
完成之後就是鍵盤類型的選定.

================================================== 
Fire GL Screen Management
==================================================
1. Default    [single screen]
2. Clone mode [2screens same content]
3. Big mode   [2screens one framebuffer]
4. Dual Head  [2screens twodrivers]
你可以選取相應的項目, 在此例中我們選取 4
接下來選取瑩幕位置. 在此例中我們選取 3

# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the Software),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# ****************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# ****************************************************************
# ****************************************************************
# DRI Section
# ****************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection
# ***************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# ***************************************************************
#
Section Module
# This loads the DBE extension module.
Load        dbe   # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection  extmod
Option    omit xfree86-dga   # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load        type1
Load        freetype
# This loads the GLX module
Load        glx   # libglx.a
Load        dri   # libdri.a
EndSection
# ***************************************************************
# Files section.  This allows default font and rgb paths to be set
# ***************************************************************
Section Files
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like .txt or .db).  There is normally
# no need to change the default.
RgbPath     /usr/X11R6/lib/X11/rgb
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 
FontPath   "/usr/X11R6/lib/X11/fonts/local/"
FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path.  The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************
# Server flags section.
# **********************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#    Option "NoTrapSignals"
# Uncomment this to disable the Crtl>Alt>BS> server abort sequence
# This allows clients to receive this key event.
#    Option "DontZap"
# Uncomment this to disable the Crtl>Alt>KP_+>/KP_-> mode switching
# sequences.  This allows clients to receive these key events.
#    Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#    Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client. 
#    Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 
#    Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#    Option "AllowNonLocalModInDev"
EndSection
# ********************************************************
# Input devices
# ********************************************************
# ********************************************************
# Core keyboard's InputDevice section
# ********************************************************
Section "InputDevice"
Identifier  "Keyboard1"
Driver      "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option "Protocol"   "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"
#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"
Option "XkbRules"   "xfree86"
Option "XkbModel"   "pc101"
Option "XkbLayout"  "us"
EndSection
# ******************************************************
# Core Pointer's InputDevice section
# ******************************************************
Section "InputDevice"
# Identifier and driver
Identifier  "Mouse1"
Driver "mouse"
Option "Protocol"   "PS/2"
Option "Device"     "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"   "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection
# ********************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# ********************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
# ********************************************************
# Monitor section
# ********************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier  "Monitor0"
HorizSync   31.5 - 82.0
VertRefresh 40-150
EndSection
Section "Monitor"
Identifier  "Monitor1"
HorizSync   31.5 - 82.0
VertRefresh 40-150
EndSection
# ******************************************************
# Graphics device section
# ******************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier  "Standard VGA"
VendorName  "Unknown"
BoardName   "Unknown"
# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset     "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.
#    BusID       "PCI:0:10:0"
#    VideoRam    256
#    Clocks      25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier                        "ATI Graphics Adapter jack 0"
Driver                            "fglrx"
# === disable PnP Monitor  ===
#Option                            "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel"                 "no"
Option "no_dri"                   "no"
# === Fire GL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup"             "0x00000000" 
Option "Display2"                 "0" 
Option "HSync2"                   "(null)" 
Option "VRefresh2"                "(null)" 
Option "GammaCorrectionI"         "0x00000000"
Option "GammaCorrectionII"        "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities"             "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay"             "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
Option "OpenGLOverlay"            "off"
#    BusID "PCI:1:0:0"    # no device found at config time
Screen 0
EndSection
Section "Device"
Identifier                        "ATI Graphics Adapter jack 1"
Driver                            "fglrx"
#    BusID "PCI:1:0:0"    # no device found at config time
Screen 1
EndSection
# *********************************************************
# Screen sections
# *********************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier  "Screen0"
Device      "ATI Graphics Adapter jack 0"
Monitor     "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth       24
Modes       "640x480"
ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
EndSubsection
EndSection
Section "Screen"
Identifier  "Screen1"
Device      "ATI Graphics Adapter jack 1"
Monitor     "Monitor1"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth       24
Modes       "640x480"
ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
EndSubsection
EndSection
# *********************************************************
# ServerLayout sections.
# *********************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier  "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
Screen "Screen1" RightOf  "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

OpenGL vendor string: ATI
OpenGL renderer string: FireGL 8700/8800
OpenGL version string: 1.2.1234 (1.2.3)

執行 fireglcontrol

3DAcceleratedWithATIHowto

Wiki Links

Latest Blogs

OSS News

1. 聲明

1.1. 版權

2. 環境

2.1. 硬體環境

2.2. 軟體環境

3. 下載驅動程式

4. 安裝

4.1. 安裝 rpm 軟體包

4.2. 安裝驅動模組

5. XF86Config 設定檔

5.1. 設定鍵盤和滑鼠

5.2. 設定瑩幕

5.3. 其它

6. Agpgart

7. 檢視

8. ATI Control Panel